|
This is a specially designed for
traditional sliding sash windows, but is ideal for any window where top or
bottom access is required.
As with the Horizontal
Sliding System the two panes may be of equal or unequal size to match your
window layout.
The panes are held open when
required by an ingenious system of ratchets which support the pane in any
position.
The Vertical Sliding System is
suitable for windows up to 8 feet high or 4 feet wide but no single pane should
exceed 12sq.ft in area.
It is normally fitted to the
inside of the window recess. If, however, you have no suitable recess, the
system may also be fitted directly to the flat wooden face of the window
surround. In either case there should be a minimum flat area of at least 42mm (1
and eleven sixteenths) to accept the tracks.
|
